Follow

IR control is not working

If The IR control of your source device is not working or only work intermittently here are some suggestions to help resolve the issue

  1. Make sure the IR eye is plugged into the receiver and the blaster is plugged into the transmitter.
  2. Make sure that your remote control is still working correctly by using it to control the sky box directly
  3. Check to see that when using the remote control through the HD sender does the Power LED (usually green) flash orange on both the Receiver and Transmitter unit.
  4. Check that the IR blaster is placed in close proximity to the IR receiver of your HDMI source
Was this article helpful?
0 out of 1 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk