Connecting the transmitter to your home router



The Provision HDLive comes with all the accessories needed in order to connect your transmitter to your home router. 

HDLive Upgrade Kit

In order to connect a HD Video Streamer to your home network the Provision HDLive Upgrade Kit is required and can be purchased from our website.

Software version

Software versions 6.00.00 and greater support connecting to the home network. 

Home Router Requirements

Any broadband wireless router should be suitable, but verify that –

  • it has a spare Ethernet socket
  • the tablet or smart phone you wish to use as a client can connect by WiFi to the home router.


1. Equipment set-up

Connect as per the diagram:



  • Connect the HDMI output of the set-top box to the HDMI input of the Video Streamer using a good quality HDMI cable.
  • Connect the TV output of the Video Streamer to an HDMI input of the TV using a good quality HDMI cable.
  • Connect the Ethernet Adaptor to the Video Streamer USB socket (on side of unit)
  • Connect one end of the Ethernet cable to the socket of the Ethernet adaptor.
  • Connect the other end of the Ethernet cable to a free socket of your home network router.

2. Power up equipment

Turn everything on and wait while powering up 

3. Check indicator LEDs

Once powered the blue streaming indicator LED will start flashing blue and the power indicator LED will be permanent green. If this is not the case, refer to the Troubleshooting.




Blue, or Blue Flashing


Normal operation



Flashing Amber



Normal operation

Ethernet cable disconnected

Ethernet adaptor





Ethernet connected

Ethernet cable disconnected

Additional Information

HDLive user guide:

Please see the Provision HDLive user guide for full details on streaming to mobile and tablet devices

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk